I was just working on a Cobra 29 LX mfg. in 2014 that has spot marked for C43 (near L3) but has no part in the spot.
C43 is part of the TX side of the hifi mods for the 29. Should I put a part in this spot in this situation or leave it blank like I found it? (This was a factory new radio)
Thanks for any info if anyone has seen this before!
73
479
Cobra 29 LX - C43?
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: Cobra 29 LX - C43?
I did a search and I'm not finding any reference to C43 except in your post.
wwpdx
wwpdx.com
wwpdx.com
-
- WWPDX MEMBER
- Posts: 43
- Joined: Mon May 28, 2018 10:17 am
- Location: Shenandoah Valley, Virginia
Re: Cobra 29 LX - C43?
I wondered about c43 too. Its in the cap mods for the Cobra 29, 2010/2011. Its in front of the heat sink and there nothing there from the factory.
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: Cobra 29 LX - C43?
It appears only the 29LTD with the TDA2003 has C43. The 29LX also has the TDA2003 audio chip but has a different circuit. The LX has C39 in the same position as C43 on the LTD. It's a 10uF, so on the LX hifi mod section I didn't list it as it's already high enough in value to pass the lows.
wwpdx
wwpdx.com
wwpdx.com