browning sabre i need a schematic and hifi mod
browning sabre i need a schematic and hifi mod
I got a browning sabre from my brother last week so now I need is a schematic to get it going. and I am looking for the hifi mod. thanks
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: browning sabre i need a schematic and hifi mod
I'll see if I can get to that after Thanksgiving.
wwpdx
wwpdx.com
wwpdx.com
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: browning sabre i need a schematic and hifi mod
A schematic is on the last page of the owners manual: http://www.cbtricks.com/radios/browning ... bre_om.pdf
I'll dig out my SAMS to get the hi-fi mod made up.
I'll dig out my SAMS to get the hi-fi mod made up.
wwpdx
wwpdx.com
wwpdx.com
Re: browning sabre i need a schematic and hifi mod
[quote="Goldfinger"]A schematic is on the last page of the owners manual: http://www.cbtricks.com/radios/browning ... bre_om.pdf
I'll dig out my SAMS to get the hi-fi mod made up.[/quote]
the owners manual does not so the wright schematic I don't know why maybe it is a older 23 not a 40 channel radio
I'll dig out my SAMS to get the hi-fi mod made up.[/quote]
the owners manual does not so the wright schematic I don't know why maybe it is a older 23 not a 40 channel radio
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: browning sabre i need a schematic and hifi mod
I'll post the mods shortly. Here is the SAMS schematic:
You can right click and save the pictures to your drive to blow them up full size. They are 300dpi so they are large and clear.
You can right click and save the pictures to your drive to blow them up full size. They are 300dpi so they are large and clear.
wwpdx
wwpdx.com
wwpdx.com
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: browning sabre i need a schematic and hifi mod
Receive:
Change C39 to a 1uF mylar/polyester or non-polarized electrolytic
Transmit:
Change C87 and C85 to .22uF or .47uF or 1uF, mylar/disc/polyester or non-polarized electrolytic
Transmit & Receive:
Change C72 to .22uF or .47uF or 1uF, mylar/disc/polyester or non-polarized electrolytic
More highs on rec and trans:
make C73 lower in value
The reason I posted a range of values for the transmit caps is you have to be careful how low you go on radios with audio transformers. I've never converted a Sabre before so I can't give exact values. Experimenting is half the fun!
Change C39 to a 1uF mylar/polyester or non-polarized electrolytic
Transmit:
Change C87 and C85 to .22uF or .47uF or 1uF, mylar/disc/polyester or non-polarized electrolytic
Transmit & Receive:
Change C72 to .22uF or .47uF or 1uF, mylar/disc/polyester or non-polarized electrolytic
More highs on rec and trans:
make C73 lower in value
The reason I posted a range of values for the transmit caps is you have to be careful how low you go on radios with audio transformers. I've never converted a Sabre before so I can't give exact values. Experimenting is half the fun!
wwpdx
wwpdx.com
wwpdx.com
Re: browning sabre i need a schematic and hifi mod
thanks goldfinger. on c89 I would thought c85 not c89 is that wright ?
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State