Page 1 of 1
Galaxy 99v2
Posted: Sat Mar 19, 2016 7:07 pm
by RT430
Hello looking for RX and TX change out for the Galaxy 99v2
Thanks for the help
Re: Galaxy 99v2
Posted: Sun Mar 20, 2016 8:10 pm
by Goldfinger
Should be the same as a Galaxy 98VHP
Receive:
C78, C40, C185: Change to 2.2uF mylar, polyester or non-polarized electrolytic
C38: Change to a 22uF-16Volt electrolytic, Observe polarity
C179: Change to a 1000uF-25 volt electrolytic, observe polarity
Transmit:
Change C154 to a 10uF-16 volt Tantalum or electrolytic, observe polarity
Change C153 to a 2.2uF-16 volt electrolytic, observe polarity
Change C171 and C235 change to 2.2uF mylar, polyester or non-polarized electrolytic
Re: Galaxy 99v2
Posted: Thu Mar 24, 2016 6:49 pm
by RT430
10 4 THANKS
Re: Galaxy 99v2
Posted: Sat Mar 24, 2018 6:55 pm
by wonderer 7
does anyone know what the amc timing cap is for this board??? like the older 3600 model board is c133 but I couldn't find anything posted for this one.any help would be greatly appreciated.
Re: Galaxy 99v2
Posted: Sun Mar 25, 2018 3:27 pm
by Goldfinger
Comparing schematics it looks like C158 is the same as C133 on the Connex
Re: Galaxy 99v2
Posted: Sun Mar 25, 2018 4:41 pm
by wonderer 7