magnum delta force

Caps, cap, capacitor, direct inject, bass, lows, hi fi, hifi, hi-fi, high fidelity, mod, mods, modification, upgrade, widen, wide audio, Goldfinger, Cobra, Galaxy, Ranger
Post Reply
grimace
WWPDX MEMBER
Posts: 69
Joined: Tue Jan 02, 2007 3:55 pm
Location: virginia

magnum delta force

Post by grimace »

need the hifi mod for the rx and tx for the magnum delta force Thanks
http://www.cbtricks.com/radios/rflimite ... in_sch.pdf
grimace
WWPDX MEMBER
Posts: 69
Joined: Tue Jan 02, 2007 3:55 pm
Location: virginia

Post by grimace »

ok wait I got is for tx. g for galaxy and m for magnum
g c128 m c259, g c187 m c283, g c191 m c397,g c190 m c391, no c129 in magnum.
now for the rx g c36 m c144, g c38 m c147, g c39 m c148, g c154 m c???, g c155 m c???, g c175 m c???
need more help thanks
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Post by Goldfinger »

For future reference, you can see the numbers better on the Magnum S-45 schematic:
http://www.cbtricks.com/radios/rflimite ... hp_sch.pdf

Receive you missed:

C157 = C279
C154 = C298
C155 = C299



Transmit:

C128 = C261
C129 = C259
C187 = C283
C191 = C397
C190 = C391
wwpdx
wwpdx.com

Image
madmax231
WWPDX MEMBER
Posts: 2
Joined: Thu Oct 26, 2017 6:07 pm

Re: magnum delta force

Post by madmax231 »

I am gonna be doing this mod on a deltaforce. Would you be so kind as to list the values and such like the other radios listed please. I have an original with the 1969's as finals. thanks in advance....
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: magnum delta force

Post by Goldfinger »

Receive:

Change C146 to a 22uF, 16 volt electrolytic, observe polarity.
Change C144, C148, C298, C299 to 2.2uF mylar, polypropylene or non-polar electrolytic.
Change C279 to a 2.2uF, 16 volt electrolytic, observe polarity
Change C293 to a 1000uF, 25 volt electrolytic, observe polarity.


Transmit:

Change C259 to a 10uF, 16 volt Tantalum or electrolytic, observe polarity
Change C261 to a 2.2uF, 16 volt electrolytic, observe polarity
Change C262 to a .001uF disc cap
Change C283 and C397 to 2.2uF mylar, polypropylene or non-polar electrolytic.
Change C391 to a 220uF, 16 volt electrolytic, observe polarity
You will have to bypass the echo board to get any bass through the mic jack


Direct Inject:

at R413 end of C397 through a 4.7uF mylar, polypropylene or non-polar electrolytic.
wwpdx
wwpdx.com

Image
madmax231
WWPDX MEMBER
Posts: 2
Joined: Thu Oct 26, 2017 6:07 pm

Re: magnum delta force

Post by madmax231 »

thanks for the quick response.
2 things....the new set of component locations are a little different from previous posts, and I cannot find C255 anywhere. Maybe a misprint? should'nt it be C299?
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: magnum delta force

Post by Goldfinger »

Yes, I FU'd... sorry
Should be 299, yes. I'll edit the post

I think "grimace" got some of them wrong. The newest list I posted was researched by me yesterday. Other than my C299 mistake it is the guide to follow. Ignore the previous posts other than using the S45 schematic as it is easier to read.
Thanks for pointing out my typing error. I was on the phone part of the time when I was typing it up.

If you want the mod to go even lower you can use 4.7uF in place of the 2.2's
cheers
wwpdx
wwpdx.com

Image
Post Reply

Return to “rx and tx mods”