Hello Goldfinger:
I would like to get your opinion on what should I replace or change in this radio to TX & RX a little bit wider or HiFi Mods for it
[/img http://www.cbtricks.com/radios/realisti ... 0a.jpg/img
[img]http://www.cbtricks.com/radios/realisti ... ch.jpg/img]
Thank for your help
Realistic TRC-30A TX & RX Mods
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Receive
Change C701 to a 1-2.2uF electrolytic or Tantalum
Change C702 to a 1-2.2uF electrolytic or Tantalum
C706 is already 4.7, prolly OK
Transmit
C707 and C710 are already big.
Change C709 and C714 to 47uF electrolytic
Make C713 and C717 smaller for more highs (C717 also affects receive highs)
Change C716 to a 470uF electrolytic
Change C701 to a 1-2.2uF electrolytic or Tantalum
Change C702 to a 1-2.2uF electrolytic or Tantalum
C706 is already 4.7, prolly OK
Transmit
C707 and C710 are already big.
Change C709 and C714 to 47uF electrolytic
Make C713 and C717 smaller for more highs (C717 also affects receive highs)
Change C716 to a 470uF electrolytic
wwpdx
wwpdx.com
wwpdx.com
Hi Goldfinger:
Thank you very much for your help,I will try these values and report how it works
Best Regards
Tony
Thank you very much for your help,I will try these values and report how it works
Best Regards
Tony
Goldfinger wrote:Receive
Change C701 to a 1-2.2uF electrolytic or Tantalum
Change C702 to a 1-2.2uF electrolytic or Tantalum
C706 is already 4.7, prolly OK
Transmit
C707 and C710 are already big.
Change C709 and C714 to 47uF electrolytic
Make C713 and C717 smaller for more highs (C717 also affects receive highs)
Change C716 to a 470uF electrolytic
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State