Page 1 of 1

S model Magnums.

Posted: Thu May 26, 2011 7:21 am
by Smiley
Receive:

C36 - change to a 1uf non-polarized electrolytic (radio shack) Need a little more bass? Use a 2.2uF non-polarized
C39 - change to a 2.2uF non-polarized electrolytic
C57 - change to a 2.2uF 16-25 volt regular electrolytic (observe polarity)
C155 - change to a 2.2uF non-polarized electrolytic
C159 - change to a 2.2uF non-polarized electrolytic
more highs:
Remove C38, or if you only want a little more highs, change to a .001uF disc or green mylar.

NOTE: C57 is actually C157
C159 is actually C154
The schematic does NOT match the Board.



Transmit:

C128 - change to a 4.7-10uF (depending on how low you wanna go) 16-25 volt tantalum. (observe polarity)
C187 - change to a 2.2uF mylar or non-polarized electrolytic
C191 - change to a 2.2uF mylar or non-polarized electrolytic

Thanks to Goldfinger.