Console V

This topic is for posting general questions and answers related to the info found in the High Fidelity Audio section above to KEEP THAT FORUM CLEAN! Only instructions, diagrams and schematics will be posted in the above section. PLEASE POST All YOUR QUESTIONS AND ANSWERS RELATED TO MODS SHOWN IN THE HIGH FIDELITY AUDIO SECTION HERE!
Post Reply
User avatar
redlght
WWPDX MEMBER
Posts: 209
Joined: Sat Jan 30, 2016 12:44 am

Console V

Post by redlght »

Any TX and RX audio mods for this rig? I have supplied the schematic for it. Thanks
sbe40sch.pdf
(2.13 MiB) Downloaded 161 times
User avatar
redlght
WWPDX MEMBER
Posts: 209
Joined: Sat Jan 30, 2016 12:44 am

Re: Console V

Post by redlght »

Here is the compression board schematic also
ScreenHunter_002.jpg
ScreenHunter_002.jpg (75.3 KiB) Viewed 2451 times
User avatar
redlght
WWPDX MEMBER
Posts: 209
Joined: Sat Jan 30, 2016 12:44 am

Re: Console V

Post by redlght »

The radio sounds tinny almost no lows dixie cup audio. The AM audio sounds fine only the ssb audio is high pitched not due to freq.
User avatar
31
WWPDX MEMBER
Posts: 216
Joined: Fri Apr 18, 2008 10:09 pm

Re: Console V

Post by 31 »

Looks simple, I'll let the man do his thing. I'm a spectator now days . Good luck dude.
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: Console V

Post by Goldfinger »

I have a lot going on but I'll look at it over the weekend and get back to you.
wwpdx
wwpdx.com

Image
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: Console V

Post by Goldfinger »

Compression board:
Change C8, C10 and C11 to 4.7uF

SSB TX main board:
Change C727, C706 and C709 to 2.2 or 4.7uF Electrolytic

It looks like the output of the Balanced Modulator (SL1640) goes through C710.
Try changing it to a .22UF Mylar or Disc
wwpdx
wwpdx.com

Image
Post Reply

Return to “>>> HIGH FIDELITY AUDIO Q and A <<< POST QUESTIONS AND COMMENTS HERE!”