silver salute

This topic is for posting general questions and answers related to the info found in the High Fidelity Audio section above to KEEP THAT FORUM CLEAN! Only instructions, diagrams and schematics will be posted in the above section. PLEASE POST All YOUR QUESTIONS AND ANSWERS RELATED TO MODS SHOWN IN THE HIGH FIDELITY AUDIO SECTION HERE!
Post Reply
User avatar
redlght
WWPDX MEMBER
Posts: 209
Joined: Sat Jan 30, 2016 12:44 am

silver salute

Post by redlght »

Is there a way to modify the audio for more bass less highs on one of these mics? Thanks
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: silver salute

Post by Goldfinger »

Replace both caps with 2.2uF-16 volt Tantalum or Electrolytic.
On the left hand cap install with the negative towards the green wire and the + towards the transistor base lead.
On the right cap, install with the + towards the same transistor at the junction of the collector/5.1K/51K.

Image
wwpdx
wwpdx.com

Image
User avatar
redlght
WWPDX MEMBER
Posts: 209
Joined: Sat Jan 30, 2016 12:44 am

Re: silver salute

Post by redlght »

Thanks for the info a big help with those tinny sounding mics
Post Reply

Return to “>>> HIGH FIDELITY AUDIO Q and A <<< POST QUESTIONS AND COMMENTS HERE!”