Robyn T240-D
-
- WWPDX MEMBER
- Posts: 13
- Joined: Fri Jan 22, 2016 3:15 pm
- Location: Staunton,VA
Robyn T240-D
I was wanting to direct inject my Robyn T240-D. Any sujestion on where to inject the audio?
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
Re: Robyn T240-D
Inject through a .1uF, 250V to pin 2 of V5b where C511 feeds the tube. You will also have to change C601 to a .1uF, 250 volt.
One problem I see with direct injecting this radio is that the transmit/receive switching is rudimentary which will allow the injected audio to be heard through the speaker in receive. You could direct inject the mic jack but would have to make all of the caps in the amp chain larger.
One problem I see with direct injecting this radio is that the transmit/receive switching is rudimentary which will allow the injected audio to be heard through the speaker in receive. You could direct inject the mic jack but would have to make all of the caps in the amp chain larger.
wwpdx
wwpdx.com
wwpdx.com
Re: Robyn T240-D
terminator look at this it mite help I mite have some of the parts
http://wwpdx.com/wwpdx.com/ForumWWPDX/v ... 32&t=16327
http://wwpdx.com/wwpdx.com/ForumWWPDX/v ... 32&t=16327