hifi rci 2980wx
-
- WWPDX MEMBER
- Posts: 87
- Joined: Sat Feb 16, 2013 10:43 pm
- Location: Staunton, Va
hifi rci 2980wx
I have ran into a odd situation, My 2980wx has the same board number as my 959 does, board # EPT690011D. I am doing a hifi mod to the 2980wx same as I done the 959 BUT at location C185 where I am suppose to replace with a 2.2uf non polarized cap, there is a resistor where a cap is labeled. It says C185, but there is a resistor instead of a mylar car. Is this due to the weather band since C185 is in the receive circuit. the concern I have is the function of a cap and a resistor are totally different should I replace the resistor that is in the C185 location with a cap. Thank you.
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
-
- WWPDX MEMBER
- Posts: 87
- Joined: Sat Feb 16, 2013 10:43 pm
- Location: Staunton, Va
-
- WWPDX MEMBER
- Posts: 87
- Joined: Sat Feb 16, 2013 10:43 pm
- Location: Staunton, Va
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State
-
- WWPDX MEMBER
- Posts: 87
- Joined: Sat Feb 16, 2013 10:43 pm
- Location: Staunton, Va
I did the direct injection, The C185 I changed with a cap and the receive got knocked out, so I put a resistor back in its place. The bass level improved, so I am going to leave the rest alone. The transmit worked great though. Someday I will get to looking into why the resistor is were a cap is labeled. Thanks Goldfinger. Happy Holidays to you and yours!
- Goldfinger
- Site Maintenance
- Posts: 3860
- Joined: Sat Jun 30, 2007 12:27 am
- Location: Beaver State