STRYKER 655 HIFI TX and RX

This topic is for posting general questions and answers related to the info found in the High Fidelity Audio section above to KEEP THAT FORUM CLEAN! Only instructions, diagrams and schematics will be posted in the above section. PLEASE POST All YOUR QUESTIONS AND ANSWERS RELATED TO MODS SHOWN IN THE HIGH FIDELITY AUDIO SECTION HERE!
Post Reply
User avatar
Turbo
WWPDX MEMBER
Posts: 635
Joined: Sat Jun 19, 2010 3:52 pm
Location: Colorado
Contact:

STRYKER 655 HIFI TX and RX

Post by Turbo »

Do any of you boys know if this could be done with one of these baby's?
I did not see a topic with one in it so wondered if with surface mount takes it out the window or not?

Thanks fellas.....73's
WWPDX 343 is a workin this ol ball and chain 8)
Hope to get ya in my video gate's!!
http://www.youtube.com/user/Mr343Turbo?feature=mhsn
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Post by Goldfinger »

A few of the guys here have modded surface mount radios, but you have to kinda cobble the larger parts in there. I'm too old and they are too small for me. I won't do SM.
Image
If you can come up with a schematic, I'd be happy to point out what to change though.
wwpdx
wwpdx.com

Image
User avatar
Turbo
WWPDX MEMBER
Posts: 635
Joined: Sat Jun 19, 2010 3:52 pm
Location: Colorado
Contact:

Post by Turbo »

I hear ya there my man. When I opened it up the first time I was surprised.
Had seen some on the net but not in person. WOW.....

Thanks for the response Goldfinger.
WWPDX 343 is a workin this ol ball and chain 8)
Hope to get ya in my video gate's!!
http://www.youtube.com/user/Mr343Turbo?feature=mhsn
User avatar
Turbo
WWPDX MEMBER
Posts: 635
Joined: Sat Jun 19, 2010 3:52 pm
Location: Colorado
Contact:

Post by Turbo »

Hey gold finger I don't think this radio would be worth the time for anyone anyway. At least those that value RMS power over peak. Wich is were I like to see performance. Might have a lot of cool things but I have found out that it will not hold RMS wattage well at all. Might peak really good but if you run a lower carrier it will not RMS even what a Cobra 2000,. 29, 148 and the like will that do not even have much done to it. Peaks like a big dog but will not hold good RMS. What a bummer... I dont know what good that is to anyone but people that like to see peak readings that are high.

A ream shame, has some neat things too.
WWPDX 343 is a workin this ol ball and chain 8)
Hope to get ya in my video gate's!!
http://www.youtube.com/user/Mr343Turbo?feature=mhsn
User avatar
Smiley
Smiley's CB Shop
Posts: 3221
Joined: Sun Feb 11, 2007 9:02 am
Location: 541-850-9581 OR 530-824-4005 Corning, Ca

Post by Smiley »

I have sold prolly 12 of these radios and RMS is fine. There 2 VRs that needs to be aligned. I can key 2 watts swing 15 RMS. No problem.
WWPDX #30
User avatar
Turbo
WWPDX MEMBER
Posts: 635
Joined: Sat Jun 19, 2010 3:52 pm
Location: Colorado
Contact:

Post by Turbo »

Smiley wrote:I have sold prolly 12 of these radios and RMS is fine. There 2 VRs that needs to be aligned. I can key 2 watts swing 15 RMS. No problem.
I guess I will need to play with it more then. I thought I had it about as good as it would get. I still would have thought it might have better avg though.

Thanks Smiley
WWPDX 343 is a workin this ol ball and chain 8)
Hope to get ya in my video gate's!!
http://www.youtube.com/user/Mr343Turbo?feature=mhsn
User avatar
Reverend Bow
WWPDX MEMBER
Posts: 322
Joined: Fri May 25, 2007 9:50 am
Location: SE Texas

Re:

Post by Reverend Bow »

Goldfinger wrote:A few of the guys here have modded surface mount radios, but you have to kinda cobble the larger parts in there. I'm too old and they are too small for me. I won't do SM.
Image
If you can come up with a schematic, I'd be happy to point out what to change though.

I got a schematic for the SR-655HP, but can't attach a PDF...
Reverend Bow
240


Quality Audio Mudduck Ministry

Bastard Modulation Engineeringâ„¢
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: STRYKER 655 HIFI TX and RX

Post by Goldfinger »

Welcome back Reverend Bow!
This is new forum software and I haven't finished setting it up.
update: I turned on document sharing for the whole forum.

cheers
wwpdx
wwpdx.com

Image
Post Reply

Return to “>>> HIGH FIDELITY AUDIO Q and A <<< POST QUESTIONS AND COMMENTS HERE!”