Cobra 1000 GTL Direct Injection?

This topic is for posting general questions and answers related to the info found in the High Fidelity Audio section above to KEEP THAT FORUM CLEAN! Only instructions, diagrams and schematics will be posted in the above section. PLEASE POST All YOUR QUESTIONS AND ANSWERS RELATED TO MODS SHOWN IN THE HIGH FIDELITY AUDIO SECTION HERE!
Post Reply
Dragon
WWPDX MEMBER
Posts: 5
Joined: Mon Mar 12, 2018 11:40 am

Cobra 1000 GTL Direct Injection?

Post by Dragon »

Hello fellow forum members. What is the direct injection point on a Cobra 1000 GTL?, I have modified for HI-FI on Rec and Tx. All I need is the crucial point of injection thank you guys.
User avatar
Goldfinger
Site Maintenance
Posts: 3849
Joined: Sat Jun 30, 2007 12:27 am
Location: Beaver State

Re: Cobra 1000 GTL Direct Injection?

Post by Goldfinger »

The 1000 has the same problem as a 29ltd. The audio section is used both for transmit and receive. Because of this you will get feedback from the mic in receive mode. To remedy this you either have to find a way to switch off the line level audio from the mic during receive or inject before TR 15. To inject before TR 15, you would inject through a 4.7uF to the positive hole of C129, then change C127 to a 1uF or 2.2uF non-polarized electrolytic or mylar or polyester.

Image
wwpdx
wwpdx.com

Image
Dragon
WWPDX MEMBER
Posts: 5
Joined: Mon Mar 12, 2018 11:40 am

Re: Cobra 1000 GTL Direct Injection?

Post by Dragon »

Thank you, you are a Technical God amongst men.
User avatar
grasshopper
WWPDX ADMIN
Posts: 2816
Joined: Tue Jan 23, 2007 8:00 pm
Location: SOUTH MISSISSIPPI
Contact:

Re: Cobra 1000 GTL Direct Injection?

Post by grasshopper »

He dang sure is.
Post Reply

Return to “>>> HIGH FIDELITY AUDIO Q and A <<< POST QUESTIONS AND COMMENTS HERE!”