yaesu md 100 8 x

All things microphone related - CB mics, studio mics, equalizers, mixers, etc...
Wiring, hookup, and application assistance too!
Post Reply
221
WWPDX MEMBER
Posts: 64
Joined: Tue Feb 12, 2013 7:00 pm

yaesu md 100 8 x

Post by 221 »

i bought a yaesu md 100 8x microphone and i wired it to work on my ranger 2980wx. on the bottom it has three switchs thru filter , high emphasis ,and low cut does anyone know how i can make them work in the manual it has that the microphone should has 5 v to it if it was used on a yaesu radio so do i need to put 5v to it for these switches to work if so how can i do that.
Post Reply

Return to “Microphones & Mic Wiring”