Anybody used the MFJ-299?

All things microphone related - CB mics, studio mics, equalizers, mixers, etc...
Wiring, hookup, and application assistance too!
Post Reply
User avatar
747_The_Captain
WWPDX MEMBER
Posts: 54
Joined: Wed May 18, 2011 1:09 pm

Anybody used the MFJ-299?

Post by 747_The_Captain »

http://www.mfjenterprises.com/Product.p ... id=MFJ-299

Just curious if there were any reports on this, good or bad. I'm thinking about picking one up for my Icom since I'm not gonna dig inside of it to bump the modulation up a tad and risk removing some of the features of the rig. On my O-Scope my icom with a stock hand mic is only putting out about 55% modulation so I'm looking to get this mic and bump it up a bit just to get the noise brought up a bit.
This is your Captain speaking, I will be flying at an altitude just high enough to get into your receive!
2388
WWPDX MEMBER
Posts: 68
Joined: Mon Apr 26, 2010 6:55 pm
Location: Carrollton Ohio

MIC

Post by 2388 »

Did ya get it ? If so how ya like it :?:
2388
Hate ta type and can't spell that's why I talk on the radio. hehehehe!
User avatar
747_The_Captain
WWPDX MEMBER
Posts: 54
Joined: Wed May 18, 2011 1:09 pm

Post by 747_The_Captain »

Haven't ordered it yet... The wife's car keeps costing me money... Stupid Volkswagen's... I should be ordering it here in the near future (next couple of weeks) and once I get it I will post up a review on it...
This is your Captain speaking, I will be flying at an altitude just high enough to get into your receive!
Post Reply

Return to “Microphones & Mic Wiring”